The Eco Hydro comes in its own aluminium lift shaft eliminating the need for a costly masonry lift well that would normally be required. This means of construction also allows the lift to be craned into position, considerably speeding up the installation time. It can also be disassembled and re-assembled. The lift is fully automatic making it easy for all to use with no constant pressure or hold to run buttons. All buttons, switches and electrical controls of commercial elevator standards to provide a long trouble-free service life.

Even in the event of power failure the emergency battery backup will allow you to lower the lift and exit safely. The passenger car has a carrying capacity of 250 kg and is a generous 900 mm x 1300 mm making it large enough for up to three people or a person in a wheelchair and a companion.

The Eco Hydro lift will fit almost any home as it only requires a footprint area of 1430 mm wide x 1550 mm deep and a set down of 80mm. It can be installed externally to the house.

It does not need a separate machine room – just space for a cabinet.
So if you find it difficult to get up and down the stairs or simply would like to enjoy the convenience of a lift the new Eco Hydro lift must be given serious consideration.